Продвижение сайта рекламного агентства и еще. дорожная светоотражающая краска для разметки асфальта

Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
- 7. Transmissions
   - 7.1. Mechanical transmission
      7.1.1. Introduction
      7.1.2. Technical characteristics
      7.1.3. Lever, casing of the lever and gear shifting mechanism
      7.1.4. Switch of fires of lamps of a backing
      7.1.5. Removal and MKPP installation
   + 7.2. Automatic transmission
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice



7.1.3. Lever, casing of the lever and gear shifting mechanism

GENERAL INFORMATION

Prevention

The models described in this management, are equipped with airbags. Before the beginning of works surely disconnect system of airbags to avoid their sudden disclosure.


Gear shifting lever

PERFORMANCE ORDER
1. Remove the lever handle.
2. Remove the central console.
3. Remove a cover of the lever of gear shifting.
4. Remove a cover from the lower part of the lever of gear shifting.
5. Remove soundproofing laying.
6. Remove a steel lock ring.
7. Remove a sealing ring and the top emphasis.
8. Lift and fix a forward part of the car.
9. Braid nuts of a flange of the catalytic converter.
10. Remove pendant arms of final system.
11. Unscrew screws and remove heatreflecting guard of the exhaust silencer.
12. Unscrew a bolt of a switching rod of a transmission and remove the gear shifting lever.
13. Installation is carried out upside-down removals.

CASING OF THE LEVER OF GEAR SHIFTING

PERFORMANCE ORDER
1. Remove the gear shifting lever from a casing.
2. Braid four nuts of a casing of the lever of gear shifting.
3. Unscrew a through bolt of an extending core and remove a casing of the lever of gear shifting.
4. Installation is carried out upside-down removals.

SWITCHING DRAUGHT

PERFORMANCE ORDER
1. Remove the gear shifting lever from a casing.
2. Disconnect switching draft and extending core from a transmission.
3. Installation is carried out upside-down removals.