Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
- 10. Running gear
   10.1. Introduction
   10.2. Technical characteristics
   - 10.3. Suspension brackets
      + 10.3.1. Rack of a forward suspension bracket
      - 10.3.2. Rack of a back suspension bracket
         10.3.2.1. Arm of a nave of a back wheel
         10.3.2.2. Nave and bearing of a nave of a back wheel
         10.3.2.3. Stabilizer of cross-section stability of a back suspension bracket
         10.3.2.4. Lever of a back suspension bracket
      10.3.3. Size of tires
      10.3.4. Corners of installation of wheels
   + 10.4. Steering
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice


10.3.2.1. Arm of a nave of a back wheel

Removal and installation

PERFORMANCE ORDER
1. Remove a back wheel.
2. Remove a nave of a back wheel and the bearing.
3. Remove the brake mechanism from a nave arm.
4. On models from ABS remove the wheel sensor.
5. Turn off fixing nuts and disconnect suspension bracket levers from a nave arm.
6. Turn off fixing nuts, remove fixing bolts (are specified by shooters) and remove a nave arm from a suspension bracket rack.
7. Installation is carried out upside-down removals.