Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
- 5. Fuel system
   + 5.1. Nikki 30/34 carburetor
   - 5.2. Power supply system (l engines 1,6 and 1,8)
      5.2.1. Introduction
      5.2.2. Technical characteristics
      5.2.3. Pressure release from a power supply system
      5.2.4. Fuel pump / pressure in a power supply system
      5.2.5. Fuel tubes and connections
      5.2.6. Removal and installation of the fuel pump
      5.2.7. Fuel level sensor
      5.2.8. Fuel tank
      5.2.9. Air filter
      5.2.10. Accelerator rope
      + 5.2.11. System of electronic injection of fuel
   + 5.3. Power supply system (l engines 2,0 and 2,5)
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice



5.2.6. Removal and installation of the fuel pump

PERFORMANCE ORDER
1. Let out pressure from a power supply system.
2. Remove back sitting and turn off fixing screws (are specified by shooters) and remove a casing.
3. Disconnect the socket of connection of the pump (at the left), turn off a nut and disconnect a wire from above the pump (on the right).
4. Disconnect a hose of supply of fuel (it is specified by the right arrow) and a hose of the return pipeline (is specified by the left arrow).
5. Turn off fixing screws (at the left) and remove the pump (on the right).
6. Disconnect the socket of connection and remove a collar.
7. Remove the pump from an arm.

8. Installation is carried out upside-down removals. Replace a sealing ring.