Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
- 10. Running gear
   10.1. Introduction
   10.2. Technical characteristics
   - 10.3. Suspension brackets
      - 10.3.1. Rack of a forward suspension bracket
         10.3.1.1. Replacement of elements of a rack of a suspension bracket
         10.3.1.2. Nave arm
         10.3.1.3. Nave and bearing of a nave of a forward wheel
         10.3.1.4. Stabilizer of cross-section stability of a forward suspension bracket
         10.3.1.5. Suspension bracket lever
         10.3.1.6. Replacement of spherical hinges
      + 10.3.2. Rack of a back suspension bracket
      10.3.3. Size of tires
      10.3.4. Corners of installation of wheels
   + 10.4. Steering
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice



10.3.1.2. Nave arm

Removal

PERFORMANCE ORDER
1. Remove a heel-tap from a nut of fastening of a nave.
2. Turn off a nut of fastening of a nave.
3. Lift the car and establish it on support. Remove a wheel.
4. Remove a brake support, a fixing arm of a support and brake
disk.
5. Remove the ABS wheel sensor if it is necessary.
6. Turn off fixing nuts of an arm of a nave.
7. Disconnect steering draft from the lever of an arm of a nave.
8. Disconnect the spherical hinge from a nave arm.
9. Get a semi-axis from a nave.
10. Remove fixing bolts and remove a nave arm.

Installation

Installation is carried out upside-down removals.