Mazda 626

1991-1998 of release

Repair and car operation

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
- 10. Running gear
   10.1. Introduction
   10.2. Technical characteristics
   - 10.3. Suspension brackets
      - 10.3.1. Rack of a forward suspension bracket Replacement of elements of a rack of a suspension bracket Nave arm Nave and bearing of a nave of a forward wheel Stabilizer of cross-section stability of a forward suspension bracket Suspension bracket lever Replacement of spherical hinges
      + 10.3.2. Rack of a back suspension bracket
      10.3.3. Size of tires
      10.3.4. Corners of installation of wheels
   + 10.4. Steering
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice Suspension bracket lever


1. Remove a wheel.
2. Disconnect connecting draft of the stabilizer of cross-section stability
from the lever.
3. Will twist a bolt and a nut of the spherical hinge.
4. Disconnect the spherical hinge of the lever from a nave arm.
5. Remove a forward sharnirny bolt (it is specified by an arrow).
6. Remove back fixing bolts and remove the suspension bracket lever (are specified by shooters).


1. Examine plugs on existence of cracks and wear tracks and replace them,
if it is necessary.
2. Examine the suspension bracket lever on existence of deformation and replace it,
if it is necessary.


Installation is carried out upside-down removals.