Mazda 626

1991-1998 of release

Repair and car operation


Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
- 5. Fuel system
   + 5.1. Nikki 30/34 carburetor
   + 5.2. Power supply system (l engines 1,6 and 1,8)
   - 5.3. Power supply system (l engines 2,0 and 2,5)
      5.3.1. Introduction
      5.3.2. Technical characteristics
      5.3.3. Pressure dumping in fuel system
      5.3.4. Fuel pump and fuel pressure
      5.3.5. Fuel tubes and connections of tubes
      5.3.6. Sensor of a measuring instrument of level of fuel
      5.3.7. Fuel tank
      5.3.8. Casing of the air filter
      5.3.9. Accelerator rope
      5.3.10. Electronic system of injection of fuel
      5.3.11. Butterfly valve casing
      5.3.12. Regulator of pressure of fuel
      5.3.13. Fuel highway and injectors
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice


5.3.7. Fuel tank

Removal and installation

PERFORMANCE ORDER
1. Pit pressure in fuel system.
2. Disconnect a wire of the minus plug of the accumulator.
3. Merge fuel from a tank through a drain opening or by means of a siphon.
4. Disconnect wires of the fuel pump and the sensor of a measuring instrument of level of fuel.
5. Lift and fix a back part of the car. Remove the section of an exhaust pipe located behind the catalytic converter.
6. Remove the valve of adjustment of pressure and the sensor of pressure of a fuel tank.
7. Disconnect hoses of giving and fuel return from metal tubes. Disconnect a tube of a jellied mouth and a ventilating hose of a fuel tank.
8. Establish a jack under a fuel tank.

9. Unscrew bolts (shooters) and remove both fixing plates of a tank.
10. Remove a fuel tank.
11. Installation is carried out upside-down removals.

Cleaning and repair

All works connected with cleaning and repair of a fuel tank should be carried out by the expert in specially equipped workshop.