Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
- 11. Body
   11.1. Introduction
   11.2. Maintenance and body repair
   11.3. Vinyl furnish
   11.4. Repair of insignificant damages of a body
   11.5. Repair of considerable damages of a body
   11.6. Loops and locks
   11.7. Replacement of a windshield and neostarting-up glasses
   11.8. Replacement front grilles (Mazda 626 model)
   11.9. Cowl
   11.10. Bumpers - removal and installation
   11.11. Forward wing
   11.12. The plastic panel before a windshield
   11.13. Panel of furnish of a door
   11.14. Doors
   11.15. Door lock, drum of the lock and handle
   11.16. Door glass
   11.17. Window regulator mechanism
   11.18. Rear-view mirrors
   11.19. Trunk lid (Mazda 626 and MX-6 models)
   11.20. Lock and drum of the lock of a trunk lid (Mazda 626 and MX-6 model)
   11.21. Ropes of opening of a cover of a luggage carrier / zaslonka of a fuel tank
   11.22. Back door (Ford Probe models)
   11.23. Lock of a back door and drum of the lock (Ford Probe model)
   11.24. Basic racks of a back door / trunk lid (model Ford Probe, MX-6)
   11.25. Central console
   11.26. Panels of furnish of the dashboard
   11.27. Casing of a steering column
   11.28. Dashboard
   11.29. Sitting
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice


11.15. Door lock, drum of the lock and handle

Removal and installation

PERFORMANCE ORDER
Door lock
1. Remove the panel of furnish of a door.
2. Disconnect drafts and connection sockets from the door lock.
3. Turn off fixing screws (are specified by shooters) and remove the lock.
4. Installation is carried out upside-down removals.
External handle of a door and lock drum
5. Remove the panel of furnish of a door.

6. Disconnect drafts and sockets of connection (And) from the lock, remove a fixing clip (In) a lock drum, having shifted it in the arrow direction (C).
7. On the Ford Probe models remove caps and turn off fixing nuts of the external handle.

On the Mazda models turn off a fixing nut of the handle of a door (it is specified by an arrow), remove a cap and turn off the second nut.

8. Remove a lock handle / drum from the car.
9. Installation is carried out upside-down removals.