Mazda 626

1991-1998 of release

Repair and car operation

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
- 11. Body
   11.1. Introduction
   11.2. Maintenance and body repair
   11.3. Vinyl furnish
   11.4. Repair of insignificant damages of a body
   11.5. Repair of considerable damages of a body
   11.6. Loops and locks
   11.7. Replacement of a windshield and neostarting-up glasses
   11.8. Replacement front grilles (Mazda 626 model)
   11.9. Cowl
   11.10. Bumpers - removal and installation
   11.11. Forward wing
   11.12. The plastic panel before a windshield
   11.13. Panel of furnish of a door
   11.14. Doors
   11.15. Door lock, drum of the lock and handle
   11.16. Door glass
   11.17. Window regulator mechanism
   11.18. Rear-view mirrors
   11.19. Trunk lid (Mazda 626 and MX-6 models)
   11.20. Lock and drum of the lock of a trunk lid (Mazda 626 and MX-6 model)
   11.21. Ropes of opening of a cover of a luggage carrier / zaslonka of a fuel tank
   11.22. Back door (Ford Probe models)
   11.23. Lock of a back door and drum of the lock (Ford Probe model)
   11.24. Basic racks of a back door / trunk lid (model Ford Probe, MX-6)
   11.25. Central console
   11.26. Panels of furnish of the dashboard
   11.27. Casing of a steering column
   11.28. Dashboard
   11.29. Sitting
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice

11.9. Cowl

Removal and installation

PERFORMANCE ORDER

1. Open a cowl.
2. Disconnect wires and the hoses disturbing to removal of a cowl.
	3. Mark the provision of installation of loops on a cowl.
	4. Turn off fixing bolts and remove a cowl.
5. Installation is carried out upside-down removals.

Adjustment

PERFORMANCE ORDER

1. Weaken fixing bolts or nuts and move a cowl as it is necessary. Tighten fixing bolts.
	2. For adjustment of position of the lock of a cowl, weaken fixing bolts of the lock and move the lock as it is necessary.
	3. Adjust height of rubber pillows of a cowl.
4. Periodically grease the lock and loops with greasing on a lithium basis.

The cowl lock – removal and installation

PERFORMANCE ORDER

	1. Mark the provision of installation of the lock. Remove the furnish panel from above the lock. Turn off fixing bolts and a nut and remove the lock.
	2. Remove a fixing clip.
	3. Disconnect the rope end.
4. Installation is carried out upside-down removals.

Rope of opening of the lock – removal and installation

PERFORMANCE ORDER

1. Disconnect a rope from the cowl lock.
2. Adhere a piece of a wire or a thick thread to a rope and remove a rope from fastenings in an impellent compartment.
3. Remove an insert of a wheel niche.
	4. Turn off fixing nuts (are specified by an arrow) and remove the handle of opening of a cowl and a rope from the dashboard.
5. Stretch a rope in salon and remove it from the car.
6. Installation is carried out upside-down removals.