Mazda 626

1991-1998 of release

Repair and car operation


Mazda 626

- 1. Maintenance instruction
   1.1. Interior review
   1.2. Dashboard review
   1.3. Information plates of the car
   1.4. Automatic inclusion of transfers
   1.5. Councils on driving
   1.6. Dashboard
   + 1.7. Warning sound / light signals, headlights
   1.8. Screen wiper and windscreen washer
   1.9. Screen wiper and washer of back glass
   1.10. Washer of headlights
   1.11. Anti-icer of back glass
   1.12. Flight computer
   1.13. Display of external temperature
   1.14. Hours
   1.15. Types of central air of air
   1.16. Safety locks
   1.17. Identification number of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice


Вентиляция на кухне. Устройство скрытых вентканалов своими руками

1.12. Flight computer
GENERAL INFORMATION

1. Flight computer

The computer of flight is located on the forward console. It can show:

  current fuel consumption;
  average fuel consumption;
  approximate distance which you can pass on fuel available in a tank.

The external temperature is shown at ignition key installation in situation ASS (I). (Address to the display of external temperature).

For change of a mode of the display be convinced that the ignition key is established in the situation ON (II) then press the SELECT button to (choose).

Mode of the current fuel consumption

1. To establish
2. To dump
3. To choose
4. Current consumption

This function shows the current fuel consumption by calculation of the spent fuel and the passable distance.

At a choice of this mode on the display CONSUM.CUR (the current consumption) will be shown.

If you lowered speed approximately to 5 km/h, on the display will be shown to L/100 Km.

Average fuel consumption

1. To establish
2. To dump
3. To choose
4. Current expense

This function shows average fuel consumption by calculation of fuel and the distance passed from the moment of pressing the RESET buttons (dumping) or from the moment of connection of the accumulator.

At a choice of this mode on the display CONSUM.AV (average consumption) will be shown.

For dumping of shown data press the RESET button approximately for 1 second. After RESET button pressing on the display within one minute will be shown... L/100 km before fuel consumption will start to pay off and be shown anew.

Distance mode to a tank devastation

1. To establish
2. To dump
3. To choose
4. On the remained fuel

This mode shows approximate distance which you can pass on the remained fuel. On the basis of fuel calculation on the last 32 kilometers.

At a choice of this mode on the display REMNG (remained) will be highlighted.

When the remained distance makes 50 kilometers or less, on the display is shown... L/100 km.

The distance display to a devastation of a tank will not change after fuelling until you will not start to conduct the car after filling.

The display will not change, if you do not add more than 12 liters of fuel.

If you had any problems with your computer of flight, consult with the authorized representative of Mazda firm.