Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

- 1. Maintenance instruction
   1.1. Interior review
   1.2. Dashboard review
   1.3. Information plates of the car
   1.4. Automatic inclusion of transfers
   1.5. Councils on driving
   1.6. Dashboard
   + 1.7. Warning sound / light signals, headlights
   1.8. Screen wiper and windscreen washer
   1.9. Screen wiper and washer of back glass
   1.10. Washer of headlights
   1.11. Anti-icer of back glass
   1.12. Flight computer
   1.13. Display of external temperature
   1.14. Hours
   1.15. Types of central air of air
   1.16. Safety locks
   1.17. Identification number of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice


1.14. Hours

GENERAL INFORMATION

Type A and B

Time installation

The ignition key should be in the family way ACC (I) or ON (II).

For installation of hour

Press the button H (hours) for change of indications of hour.

For installation of minutes

Press the button M (minutes) for change of the indication of minutes.

Type A

1. Hours

2. Minutes

3. Dumping

Type B

1. Hours

2. Minutes

3. Dumping

4. Time

Press the RESET button to (dump) for dumping of minutes. Hours will be established on the indication of hours.

For example, if the RESET button was pressed in time from 9:00 till 9:29, time will be established at 9:00. If it is pressed in time from 9:30 till 9:59, time will be established at 10:00.

9:01-9:29= 9:00
9:30-9:59= 10:00

At food shutdown time is automatically dumped at 1:00.

Type C

1. To establish

2. To dump

3. To choose

Time installation

The ignition key should be established in the situation ACC (I) or ON (II).

Press the SET button to (establish) and hold her in the pressed condition within about 2 seconds until the display of time will not start to blink. Release the button. Then press the SET button repeatedly for installation of indications of minutes and hours.

On termination of installation of time press the SELECT button to (choose) for start-up of hours.

When time display on hours blinks, press the RESET button to (dump) for indication dumping. Hours will be established on time display in hours.

If hours are dumped at indications on the display, for example, from 9:01 till 9:29, time will be dumped at 9:00. If dumping occurs with 9:30 till 9:59, time will be dumped at 10:00.

At food shutdown time is automatically dumped at 1:00.

Type D

1. Hours

If the car is equipped with an audiosystem, hours are built in this system.