Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Heating and ventilation
   4.1. Introduction
   4.2. Technical characteristics
   4.3. Thermostat
   4.4. Cooling fans
   4.5. Radiator and broad tank
   4.6. Water pump
   4.7. The sensor of temperature of cooling liquid
   4.8. Oil radiator of the engine (6-cylinder models)
   4.9. Electric chain of the motor of the delivery fan
   4.10. Motor of the delivery fan
   4.11. Control unit heater and air conditioner
   4.12. Heater radiator
   + 4.13. Systems of air conditioning and heating
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice



4.10. Motor of the delivery fan

GENERAL INFORMATION

Prevention

The models described in this management, are equipped with airbags. Before the beginning of works surely disconnect system of airbags to avoid their sudden disclosure.


Removal and installation

PERFORMANCE ORDER
1. Remove the panel of internal furnish located under a ware box.
2. Disconnect wires from the motor, the resistor and the relay of high speed of the fan.
3. Unscrew three fixing screws of the motor.
4. Remove the motor.
5. Remove a clamp from a shaft of the motor and disconnect fan blades from the motor.
6. Installation is carried out upside-down removals.