Mazda 626

1991-1998 of release

Repair and car operation

Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
- 4. Heating and ventilation
   4.1. Introduction
   4.2. Technical characteristics
   4.3. Thermostat
   4.4. Cooling fans
   4.5. Radiator and broad tank
   4.6. Water pump
   4.7. The sensor of temperature of cooling liquid
   4.8. Oil radiator of the engine (6-cylinder models)
   4.9. Electric chain of the motor of the delivery fan
   4.10. Motor of the delivery fan
   4.11. Control unit heater and air conditioner
   4.12. Heater radiator
   + 4.13. Systems of air conditioning and heating
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice

4.12. Heater radiator

Replacement

PERFORMANCE ORDER

1. Disconnect a wire of the minus plug of the accumulator.

2. Merge cooling liquid.

3. Remove the central console and the dashboard.

4. Disconnect hoses from the heater block (are specified by shooters).

5. Unscrew bolts and braid nuts of the block of the evaporator and the motor of the delivery fan. Arrange the block aside that it did not disturb heater removal.

6. Weaken a nut (And) and braid two top nuts (In).

7. Braid the bottom nut (it is specified by an arrow) heater block.

8. Remove a heater.

9. Unscrew four bolts (are specified by shooters) covers of a radiator of a heater.

10. Get a radiator from the heater block.

11. Installation is carried out upside-down removals.