Mazda 626

1991-1998 of release

Repair and car operation


Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
- 8. Coupling and semi-axes
   8.1. Introduction
   8.2. Technical characteristics
   - 8.3. Coupling
      8.3.1. Cylinders of a drive of switching off of coupling
      8.3.2. Hydraulic system of a drive of switching off of coupling
      8.3.3. Elements of the mechanism of coupling
      8.3.4. Vyzhimna bearing and fork of the vyzhimny bearing
      8.3.5. Adjustment of a pedal of coupling
      8.3.6. Blocking switch
   + 8.4. Semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice


Как сделать плетеный стул

8.3.1. Cylinders of a drive of switching off of coupling

MAIN CYLINDER OF THE DRIVE OF SWITCHING OFF OF COUPLING

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Disconnect draft of the cylinder from a pedal of coupling and turn off a fixing nut under the dashboard.
3. Remove the coal filter.
4. Press and disconnect a hydraulic hose from the cylinder. Disconnect a hydraulic tube.
5. Turn off the remained fixing nut and remove the cylinder.

Installation

Installation is carried out upside-down removals.

WORKING CYLINDER OF THE DRIVE OF SWITCHING OFF OF COUPLING

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Disconnect a hydraulic tube from the cylinder, turn off fixing bolts and remove the cylinder.

Installation

Installation is carried out upside-down removals.