Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
- 12. Electric equipment
   12.1. Introduction
   12.2. Search of a source of malfunction in electric equipment system
   12.3. Safety locks
   12.4. Automatic switches
   12.5. Relay
   12.6. Breaker of indexes of turns / alarm system
   12.7. Switches on a steering column
   12.8. Switch of ignition and lock drum
   12.9. Switches on the dashboard
   12.10. Tools of an instrument guard
   12.11. Instrument guard
   12.12. Radio receiver and loudspeakers
   12.13. Aerial
   12.14. Bulbs of headlights of head light
   12.15. Headlights of head light
   12.16. Drive of headlights of head light
   12.17. Replacement of bulbs
   12.18. Engine of screen wipers
   12.19. Horn of a sound signal
   12.20. System of day inclusion of headlights
   12.21. Heater of back glass
   12.22. System cruise control
   12.23. Electric window regulators
   12.24. Central lock and remote control by the central lock
   12.25. A rear-view mirror with the electric drive
   12.26. Top hatch
   12.27. Safety airbag
+ 13. Electroschemes
+ 14. Good advice


Лечение фенилкетонурии у детей

12.25. A rear-view mirror with the electric drive

GENERAL INFORMATION

Rear-view mirrors with the electric drive use two electric motors for adjustment of provision of glass.

Check of conductivity of a regulator of rear-view mirrors – the Ford Probe models

Position of the switch
Tension on the plug
Left mirror, turn up
7
Left mirror, turn down
1 and 2
Left mirror, turn to the left
2 and 7
Left mirror, turn to the right
1
Right mirror, turn up
7
Right mirror, turn down
5 and 6
Right mirror, turn to the left
7 and 6
Right mirror, turn to the right
5

Check of conductivity of a regulator of rear-view mirrors – the Mazda 626 models till 1997 of release

Position of the switch
Conductivity between plugs
Left mirror, turn up
I and J; With, I and J
Left mirror, turn down
I and C; L and J
Left mirror, turn to the left
I and C; N and J
Left mirror, turn to the right
I and N; With, L and J
Right mirror, turn up
I and L; And, F and J
Right mirror, turn down
L and J; A and I
Right mirror, turn to the left
I and A; F and J
Right mirror, turn to the right
I and F; A, L and J

Check of conductivity of a regulator of rear-view mirrors – the Mazda MX-6 models

Position of the switch
Conductivity between plugs
Left mirror, turn up
A and L; I and K
Left mirror, turn down
I and A; K and L
Left mirror, turn to the left
I and A; D and L
Left mirror, turn to the right
A and L; D and I
Right mirror, turn up
C and L; K and I
Right mirror, turn down
C and I; K and L
Right mirror, turn down
C and I; K and L
Right mirror, turn to the right
I and B; L and C

Check

PERFORMANCE ORDER
1. Lower glass of a door and try to adjust the provision of glass of a rear-view mirror. You should hear noise of working engines.
2. If noise is audible, but glass does not move, the connecting mechanism is possibly faulty. Remove and disassemble a rear-view mirror.
3. If noise of engines is not audible, check a radio receiver safety lock.

4. If a safety lock as it should be, remove the electric drive switch (it is specified by an arrow) and check food existence.
5. Check operation of the switch, having used an ohmmeter and the Table of conductivity of a regulator of rear-view mirrors – the Ford Probe models, the Table of conductivity of a regulator of rear-view mirrors – the Mazda 626 models till 1997 of release, the Table of conductivity of a regulator of rear-view mirrors – the Mazda MX-6 models. Replace the switch if it is necessary.
6. Check connecting wires between the switch and a rear-view mirror.
7. Replace the mirror electric drive if it is faulty.