Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
- 12. Electric equipment
   12.1. Introduction
   12.2. Search of a source of malfunction in electric equipment system
   12.3. Safety locks
   12.4. Automatic switches
   12.5. Relay
   12.6. Breaker of indexes of turns / alarm system
   12.7. Switches on a steering column
   12.8. Switch of ignition and lock drum
   12.9. Switches on the dashboard
   12.10. Tools of an instrument guard
   12.11. Instrument guard
   12.12. Radio receiver and loudspeakers
   12.13. Aerial
   12.14. Bulbs of headlights of head light
   12.15. Headlights of head light
   12.16. Drive of headlights of head light
   12.17. Replacement of bulbs
   12.18. Engine of screen wipers
   12.19. Horn of a sound signal
   12.20. System of day inclusion of headlights
   12.21. Heater of back glass
   12.22. System cruise control
   12.23. Electric window regulators
   12.24. Central lock and remote control by the central lock
   12.25. A rear-view mirror with the electric drive
   12.26. Top hatch
   12.27. Safety airbag
+ 13. Electroschemes
+ 14. Good advice



12.7. Switches on a steering column

GENERAL INFORMATION

Identification of plugs of switches – models till 1997 of release

The table of conductivity of switches on a steering column – models till 1997 of release

The combined switch
Position of the switch
Conductivity between plugs
Headlights of head light
3 and 8
Front position lamps
2 and 3
Passing beam of headlights
15 and 19
Driving beam of headlights
19 and 17
Blinking of headlights
17 and 18
Left indexes of turns
9 and 16
Right indexes of turns
9 and 20
Alarm system
6 and 14
Switch of screen wipers / washers:
  – it is switched off
4 and 13
  – low speed
11 and 13
  – high speed
11 and 12
  – work of screen wipers with pauses
11 and 12
  – stekloomyvatel
5 and 11

Identification of plugs of the combined switch – models of 1998 of release


Identification of plugs of the switch of screen wipers / washers – models of 1998 of release

The table of conductivity of the combined switch – models of 1998 of release


Position of the switch
Conductivity between plugs
Headlights of head light
9,10 and 11
Front position lamps
10 and 11
Passing beam of headlights
2 and 6; 7 and 8
Driving beam of headlights
2 and 5; 3 and 7
Blinking of headlights
9 and 11
Left indexes of turns
12 and 14
Right indexes of turns
12 and 13
Alarm system
6 and 14

The table of conductivity of the switch of screen wipers / washers – models of 1998 of release


Position of the switch
Conductivity between plugs
It is switched off
3 and 5
Low speed
3 and 6
High speed
4 and 6
Work of screen wipers with pauses
4 and 6
Stekloomyvateli
1 and 6

Check

PERFORMANCE ORDER
1. Remove the bottom casing of a steering column and disconnect 6-штырьковый and 14-shtyrkovy sockets of connection.
2. Check conductivity existence between switch plugs, being guided by the provided tables fig. The table of conductivity of switches on a steering column – models till 1997 of release, the Table of conductivity of the combined switch – models of 1998 of release, the Table of conductivity of the switch of screen wipers / washers – models of 1998 of release.

Replacement

PERFORMANCE ORDER
Models till 1997 of release
1. Disconnect a wire of the minus plug of the accumulator.
2. Remove a steering wheel and casings of a steering column.
3. Remove a screw spring.
4. Turn off fixing screws (are specified by shooters), disconnect sockets of connection and remove the switch.
5. Installation is carried out upside-down removals.
Models of 1998 of release
6. Remove casings of a steering column.
7. Disconnect the connection socket, turn off fixing screws and remove the switch.
8. Installation is carried out upside-down removals.