Mazda 626

1991-1998 of release

Repair and car operation


Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
- 6. Exhaust system
   + 6.1. Exhaust system
   - 6.2. Systems of decrease in toxicity of exhausts and management of operation of the engine
      6.2.1. Introduction
      6.2.2. System of self-diagnostics and malfunction codes
      6.2.3. Central control unit
      6.2.4. Sensor of provision of a butterfly valve
      6.2.5. Sensor of a stream of air
      6.2.6. The sensor of temperature of arriving air
      6.2.7. The sensor of temperature of cooling liquid
      6.2.8. Sensor of provision of a cranked shaft
      6.2.9. Sensor of provision of a camshaft
      6.2.10. Switch of system of hydrostrengthening of a steering
      6.2.11. Oxygen sensor
      6.2.12. Sensor of detonation combustion of fuel
      6.2.13. Sensor of speed
      6.2.14. Air valve
      6.2.15. System of additional supply of air on low turns
      6.2.16. System of ventilation of a case
      6.2.17. System of a retsirkulyatsiya of exhaust gases
      6.2.18. Collecting system паров fuels
      6.2.19. Switch of fires of a stoplight
      6.2.20. Catalytic converter
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice


6.2.10. Switch of system of hydrostrengthening of a steering

Check

PERFORMANCE ORDER
1. Disconnect the socket of connection of the switch. Start the engine.
2. Establish forward wheels directly and check, that the switch disconnected a chain.
3. Turn wheels at first in one, then in other party against the stop and check, that the switch closed a chain when wheels will be almost completely turned.
4. Replace the switch if it is faulty.

Replacement

PERFORMANCE ORDER
1. Disconnect the socket of connection and unscrew the switch.
2. Installation is carried out upside-down removals.