Mazda 626

1991-1998 of release

Repair and car operation


Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
- 9. Brake system
   9.1. Introduction
   9.2. Technical characteristics
   9.3. System of anti-blocking of brakes (ABS)
   9.4. Brake overlays of disk brakes
   9.5. Brake support
   9.6. Brake disk
   9.7. Brake shoes of drum-type brakes
   9.8. Wheel cylinder
   9.9. Main brake cylinder
   9.10. Brake tubes and hoses
   9.11. Pumping of brake system
   9.12. Vacuum amplifier
   9.13. Height and free wheeling of a pedal of a brake
   9.14. Hand brake
   9.15. Ropes of the hand brake
   9.16. Switch of an alarm bulb of low level of brake liquid
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice


9.13. Height and free wheeling of a pedal of a brake
GENERAL INFORMATION

Measurement of height of a pedal of a brake
1. Regulator of length of a pusher and free wheeling of a pedal of a brake

2. Adjusting bolt of height of a pedal of a brake

Adjustment

PERFORMANCE ORDER
Height of a pedal of a brake
1. Measure height of a pedal of a brake.
2. For adjustment of height of a pedal turn off a lock-nut and tighten up an adjusting bolt.
3. Adjust the switch of fires of a stoplight.
Free wheeling of a pedal of a brake
4. Measure a free wheeling of a pedal of a brake.
5. For adjustment of a free wheeling of a pedal of a brake, turn off a lock-nut on a pusher of a servoamplifier and tighten up a regulator of length of a pusher and a free wheeling of a pedal of a brake.
6. Adjust the switch of fires of a stoplight.