Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
- 9. Brake system
   9.1. Introduction
   9.2. Technical characteristics
   9.3. System of anti-blocking of brakes (ABS)
   9.4. Brake overlays of disk brakes
   9.5. Brake support
   9.6. Brake disk
   9.7. Brake shoes of drum-type brakes
   9.8. Wheel cylinder
   9.9. Main brake cylinder
   9.10. Brake tubes and hoses
   9.11. Pumping of brake system
   9.12. Vacuum amplifier
   9.13. Height and free wheeling of a pedal of a brake
   9.14. Hand brake
   9.15. Ropes of the hand brake
   9.16. Switch of an alarm bulb of low level of brake liquid
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice



9.2. Technical characteristics

GENERAL INFORMATION

The general
Brake pedal
Height (to a carpet):
  – models of 1993-1997 of release
156-161 mm
  – models of 1998 of release
175-0,5 mm
Free wheeling:
  – models of 1993-1997 of release:
     • models with a mechanical transmission
4–8 mm
     • models with an automatic transmission
8–12 mm

  – models of 1998 of release

8–12 mm
Course of the lever of the hand brake:
  – models of 1993-1997 of release
5–7 clicks
  – models of 1998 of release
6–8 clicks
Gap between a pusher of the vacuum amplifier of brake system and the piston of the main cylinder (at depression in the vacuum amplifier of 500 mm of a mercury column)
0,1-0,3 mm
Disk brakes:
Minimum thickness of brake slips
Minimum thickness of a brake disk
It is specified disk surfaces
Distinction in thickness of a disk
no more than 0,025 mm
The most admissible palpation of a disk
0,1 mm

Drum-type brakes:

  – minimum admissible thickness of a frictional material of brake shoes
  – maximum diameter of a brake drum
It is specified on a drum

Moments of an inhaling, N of m.

The general
Bolt of connection of a banjo on a brake support
21-30
Fixing nuts of the main brake cylinder
11-16
Fixing nuts of an arm of the balance weight
19-25
Fixing nuts of the vacuum amplifier
19-25
Fixing bolts of the ABS wheel sensor
16-23
Forward disk brakes:
Fixing bolts of a support
45-49
Bolts of a fixing arm of a support
78-100

Fixing screws of a brake disk

10-13
Back disk brakes:
Fixing bolts of a support
34-39
Bolts of a fixing arm of a support
45-66