Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Technical characteristics
   2.2. Schedule of maintenance of Ford Probe, Mazda 626 and MX-6
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of a steering
   2.7. Check of level of AKPP liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Check of seat belts
   2.10. Survey and replacement of brushes of screen wipers
   2.11. Check, maintenance and battery charging
   2.12. Check, adjustment of a tension and replacement of a driving belt
   2.13. Check and replacement of hoses in an impellent compartment
   2.14. Check of system of cooling
   2.15. Shift of wheels
   2.16. Check of brake system
   2.17. Check of level of oil of a mechanical transmission
   2.18. Replacement of the air filter
   2.19. Check and replacement of spark plugs
   2.20. Check and replacement of elements of system of ignition
   2.21. Check and replacement of the valve of ventilation of a case
   2.22. Check and adjustment of speed of idling (model till 1997 of century)
   2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997 of century)
   2.24. Replacement of cooling liquid and washing of system of cooling
   2.25. Replacement of brake liquid
   2.26. Steering and suspension bracket check
   2.27. AKPP liquid replacement
   2.28. Replacement of oil of a mechanical transmission
   2.29. Check of an exhaust system
   2.30. Power supply system check
   2.31. Check and adjustment of gaps of valves (model of 1998 of release)
   2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice



2.11. Check, maintenance and battery charging

GENERAL INFORMATION

Tools and materials necessary for maintenance of the accumulator

1. Protective guards / points

2. Soda

3. Technical vaseline

4. The tool for cleaning of plugs of the accumulator

5. Laying

6. Stripper

7. The tool for cleaning of contacts

8. Rubber gloves

Check

PERFORMANCE ORDER
1. Before work with the accumulator prepare necessary tools and materials.

Prevention

The electrolit of the accumulator contains sulfuric acid and allocates hydrogen which at a mix with air becomes explosive. Observe precautionary measures at work with the accumulator.


2. Examine the accumulator on existence of leak or damages. Check reliability of fastening of the accumulator. Check a condition of plugs of the accumulator and reliability of contact of wires.
3. Check a battery charging. On some accumulators for check of a charging the special sensor is provided.

Maintenance

PERFORMANCE ORDER
1. Corrosion on accumulator plugs usually looks as a white powder.
2. If on plugs of the accumulator there is a corrosion, disconnect wires from the accumulator.
3. Clear accumulator plugs before formation of a pure brilliant surface.
4. Remove all traces of corrosion from contacts of wires.
5. Clear the accumulator shelf if it is necessary. Grease accumulator plugs with technical vaseline and connect wires. Reliably fix the accumulator on the storage shelf.

Battery charging

PERFORMANCE ORDER
1. For a battery charging it is recommended to use the charger with a small current of a charging (1–2 Amperes). For a fast charging it is possible to use the charger with a big current of a charging, however, it should not exceed 1/10 capacities of the accumulator.
2. For a full battery charging the charger with a small current of a charging 12–16 hours usually suffice.