Mazda 626

1991-1998 of release

Repair and car operation


Mazda 626

+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Technical characteristics
   2.2. Schedule of maintenance of Ford Probe, Mazda 626 and MX-6
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of a steering
   2.7. Check of level of AKPP liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Check of seat belts
   2.10. Survey and replacement of brushes of screen wipers
   2.11. Check, maintenance and battery charging
   2.12. Check, adjustment of a tension and replacement of a driving belt
   2.13. Check and replacement of hoses in an impellent compartment
   2.14. Check of system of cooling
   2.15. Shift of wheels
   2.16. Check of brake system
   2.17. Check of level of oil of a mechanical transmission
   2.18. Replacement of the air filter
   2.19. Check and replacement of spark plugs
   2.20. Check and replacement of elements of system of ignition
   2.21. Check and replacement of the valve of ventilation of a case
   2.22. Check and adjustment of speed of idling (model till 1997 of century)
   2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997 of century)
   2.24. Replacement of cooling liquid and washing of system of cooling
   2.25. Replacement of brake liquid
   2.26. Steering and suspension bracket check
   2.27. AKPP liquid replacement
   2.28. Replacement of oil of a mechanical transmission
   2.29. Check of an exhaust system
   2.30. Power supply system check
   2.31. Check and adjustment of gaps of valves (model of 1998 of release)
   2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice


2.20. Check and replacement of elements of system of ignition

Wires of a high voltage

PERFORMANCE ORDER
1. Examine wires of a high voltage on existence of traces from sparks at the working engine.
2. Disconnect wires from spark plugs, undertake only a wire cover. Examine contacts a wire, clear contacts of corrosion or replace wires.
3. Connect wires to spark plugs.
4. Wipe wires of a high voltage on all length and examine wires on existence of damages or wear.
5. Disconnect wires from the distributor or the ignition coil. Check a condition of contacts.

Cover of the distributor of ignition and begunok

PERFORMANCE ORDER
1. Turn off fixing screws and uncover the ignition distributor.
2. Examine a cover on existence of cracks (1), traces from the sparks (2), the broken-off sites (3) and other damages.
3. Examine a cover of the distributor of ignition from the inside on existence of traces from sparks (1). Check, whether plugs (3) are erased and whether the piece of coal (2) is damaged.
4. Remove a begunok and examine it on existence of cracks (3), corrosion (2) and other damages. Check, whether the spring (1) is weakened. Replace a cover and a begunok if it is necessary.
5. Check resistance of contacts between wires of a high voltage and a cover.

Ignition coil

PERFORMANCE ORDER
Examine the coil on existence of cracks, damages and traces from sparks.