Mazda 626

1991-1998 of release

Repair and car operation



Mazda 626

+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Technical characteristics
   2.2. Schedule of maintenance of Ford Probe, Mazda 626 and MX-6
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of a steering
   2.7. Check of level of AKPP liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Check of seat belts
   2.10. Survey and replacement of brushes of screen wipers
   2.11. Check, maintenance and battery charging
   2.12. Check, adjustment of a tension and replacement of a driving belt
   2.13. Check and replacement of hoses in an impellent compartment
   2.14. Check of system of cooling
   2.15. Shift of wheels
   2.16. Check of brake system
   2.17. Check of level of oil of a mechanical transmission
   2.18. Replacement of the air filter
   2.19. Check and replacement of spark plugs
   2.20. Check and replacement of elements of system of ignition
   2.21. Check and replacement of the valve of ventilation of a case
   2.22. Check and adjustment of speed of idling (model till 1997 of century)
   2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997 of century)
   2.24. Replacement of cooling liquid and washing of system of cooling
   2.25. Replacement of brake liquid
   2.26. Steering and suspension bracket check
   2.27. AKPP liquid replacement
   2.28. Replacement of oil of a mechanical transmission
   2.29. Check of an exhaust system
   2.30. Power supply system check
   2.31. Check and adjustment of gaps of valves (model of 1998 of release)
   2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice


2.24. Replacement of cooling liquid and washing of system of cooling

GENERAL INFORMATION

When the system of cooling gets littered, and cooling liquid gains rusty color, it it is necessary to replace and wash out cooling system.

Plums of cooling liquid

PERFORMANCE ORDER
1. Remove a radiator cap, надавиви on a cap of a radiator and having turned it counter-clockwise, and a cap of a jellied mouth depending on model. Remove a cap of a broad tank.
2. Open the drain cap located in the lower part of a radiator, and merge cooling liquid from a radiator. Disconnect the bottom hose of a radiator and merge cooling liquid from the engine. If cooling liquid has rusty color, the system of cooling is necessary for washing out.

Washing of system of cooling

PERFORMANCE ORDER
1. Remove the thermostat.
2. Connect the bottom hose of a radiator into place. Transfer the handle of adjustment of temperature in salon to the situation "HOT" for washing of a heater of an oven together with cooling system.
3. Disconnect the top hose of a radiator and wash out a radiator pure flowing water or a special cleaner. If the radiator is strongly littered, remove a radiator and address to experts for its washing and / or repair.

The gulf of cooling liquid

PERFORMANCE ORDER
1. Establish the thermostat on a place and connect hoses of system of cooling.
2. Fill in cooling liquid in a tank of cooling liquid.