Mazda 626

1991-1998 of release

Repair and car operation

Mazda 626

+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Technical characteristics
   2.2. Schedule of maintenance of Ford Probe, Mazda 626 and MX-6
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of a steering
   2.7. Check of level of AKPP liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Check of seat belts
   2.10. Survey and replacement of brushes of screen wipers
   2.11. Check, maintenance and battery charging
   2.12. Check, adjustment of a tension and replacement of a driving belt
   2.13. Check and replacement of hoses in an impellent compartment
   2.14. Check of system of cooling
   2.15. Shift of wheels
   2.16. Check of brake system
   2.17. Check of level of oil of a mechanical transmission
   2.18. Replacement of the air filter
   2.19. Check and replacement of spark plugs
   2.20. Check and replacement of elements of system of ignition
   2.21. Check and replacement of the valve of ventilation of a case
   2.22. Check and adjustment of speed of idling (model till 1997 of century)
   2.23. Check and adjustment of a corner of an advancing of ignition (model till 1997 of century)
   2.24. Replacement of cooling liquid and washing of system of cooling
   2.25. Replacement of brake liquid
   2.26. Steering and suspension bracket check
   2.27. AKPP liquid replacement
   2.28. Replacement of oil of a mechanical transmission
   2.29. Check of an exhaust system
   2.30. Power supply system check
   2.31. Check and adjustment of gaps of valves (model of 1998 of release)
   2.32. Replacement of the fuel filter
+ 3. Engines
+ 4. Heating and ventilation
+ 5. Fuel system
+ 6. Exhaust system
+ 7. Transmissions
+ 8. Coupling and semi-axes
+ 9. Brake system
+ 10. Running gear
+ 11. Body
+ 12. Electric equipment
+ 13. Electroschemes
+ 14. Good advice

видео дрочит одна дома

2.4. Check of level of oil and liquids


Engine oil

Shchup for check of level of oil (it is specified by an arrow) is located on the right back side of the engine. Level of oil is necessary for checking before a trip on the car or in 15 minutes after engine switching off.

1. Get щуп and wipe the end щупа. Insert щуп up to the end into a tube and again get it. Level of oil should be between two lines on щупе. The difference in number of oil between marks on щупе makes about 1 liter. Add oil to the top mark if it is necessary.
2. The jellied mouth is located on a cover of the klapanny mechanism. The cap of a jellied mouth is turned off counter-clockwise. For the gulf of oil remove a cap of a jellied mouth, insert into a mouth a funnel and fill in oil.

Cooling liquid

On models since 1998 of release check, that level of cooling liquid was between marks of MAX and MIN in a tank wall.

1. Regularly check level of cooling liquid in a tank with the help щупа or marks in a tank wall. When the engine is heated-up, level of liquid should raise to the top mark. Add cooling liquid if it is necessary.
2. At check of level of cooling liquid also check its condition. If liquid gained brown or rusty color, it it is necessary to replace and wash out cooling system.

Washing liquid

The tank for liquid of washers of a windshield is located in a forward corner of an impellent compartment.
The tank for liquid of washers of back glass is located in a luggage carrier. Check, that level of liquid was near the top mark in a jellied mouth. During the cold period of year use special nonfreezing cooling liquid.

Brake liquid and liquid of a hydraulic drive of switching off of coupling

The tank of brake liquid is located in front of the vacuum amplifier, and the tank of hydraulic liquid of a drive of switching off of coupling is located near a tank of brake liquid on a back wall of an impellent compartment. Check, that level of liquid was between marks the MOVE and MIN on a tank wall. Add liquid of demanded type if it is necessary.