1. Pass on the car to warm up liquid of an automatic transmission. |
2. Lift the car and establish it on support. |
3. Establish the pallet under a transmission and turn off a cap of a drain opening. When liquid will flow down, wipe a cap and establish it into place. |
The Ford models with CD4E and Mazda transmission with LA4-EL transmission |
4. Lower the car on the earth. Further see point 11. |
The Ford models with 4EAT and Mazda transmission with GF4A-EL transmission |
5. Turn off fixing bolts of the pallet of a transmission and remove the pallet. Remove old laying. |
|
6. Pour out old liquid of the pallet, wash out the pallet solvent and dry up it. Do not forget to establish magnets on the places. |
|
7. Turn off fixing bolts (are specified by shooters) and remove the old filter. |
|
8. Establish a sealing ring on the new filter, establish the filter on a place and twirl fixing bolts. |
9. Establish new laying of the pallet and establish the pallet on a transmission. Twirl fixing bolts till the demanded moment of an inhaling. |
10. Lower the car on the earth. |
All models |
11. Get щуп for check of level of oil and fill in new oil in a transmission through a tube щупа. |
12. Start the engine and translate the switching lever through all provisions in turn. Again include parking transfer and check liquid level. Add liquid if it is necessary. |